XANDADECK ADVANCED FEATURES
Using the “+ Add Image” button, you can upload an Image to Xandadeck. When you click the “+ Add Image” button, you are requested to provide the following: “Name” is the name… We are currently supporting Videos with burned subtitles. Check the Video section here for further information (scroll a little down to the “Enable Subtitles” section). Make sure that you reach out and… The Xandabox (based on Raspberry Pi) automatically detects on start-up the “preferred” resolution of the connected monitor (usually, its native resolution). In some cases, the preferred resolution is not detected… All Video files you upload to Xandadeck, go through re-encoding (also known as “transcoding”) to ensure that the Video will be playable on the Player. Our Players only support the… Web Pages provide a single URL address that is used throughout Xandadeck. In case you wanted to display different content depending on the device (Monitor), then you would have to… You can use a Xandabox for LED screens and LED billboards. We have users running large LED displays using Xandaboxs based on Raspberry Pi. To properly use a LED display, you… WARNING: This section is used by the pre-provisioning mechanism of Xandadeck. You should not change this information, unless you really know what you are doing.Preconfiguring Device Registration Example section with… Introduction With Xandadeck, you have two options for configuring a Player: Though the web Though the “SETTINGS.txt” configuration file on the SD Card of the Player If you choose the… To log in as “root”, you can first login as user “user” and then use the “sudo” command to have “root” access. You can reset the password for user “user”… The Xandabox (or Raspberry Pi in general) includes a CEC adapter on its HDMI monitor port. CEC is a standard communication protocol supported by most major TV manufacturers. It allows…Adding an Image
Support for Subtitles in Videos
Why is my Player running in VGA resolution (640×480)?
Bypassing Video Re-encoding (As-Is Upload)
Web Page – URL Parameters Per Device
Support for LED board screens and billboards
Xandadeck Registration Information [REGISTRATION]
Xandadeck Manual Configuration Guide
Can I have root access to the Xandabox?
How does Xandadeck support powering on and off monitors and TVs? Are all monitors and TVs compatible with this feature?